Raise arm manual barrier

• Standard raise arm barrier spans from 3 metres to 7 metres.
• Pole Diameter 76mm.
• Heavy duty raise arm barrier spans from 7 metres to 9 metres.
• Pole Diameter 100mm.
• Pivot assembly made of steel box section, zinc plated shaft pivoting on two heavy duty Stainless Steel bearing blocks.
• Additional counterweights allowing ease of lift and smooth operation.
• Latching mechanism latches barrier up or down without the need for locking.
• Can be padlocked in the up or down position.
• Optional locking at pivot post in additional to end rest in down position.
• Aluminium arm finished in either alternate red and white or alternate yellow and black vinyl hatching (other colours available).
• Powder coated red or yellow as standard (other colours available).
• Comes complete with tip support, padlocks and fixings.
• Optional extras: Lattice folding pedestrian skirting, signage and pogo support.

Swinging Access Gate

• Spans from 3m to 13m manufactured to customer specification.
• Gates can either be latched together providing a large open entrance when gates are open. Or to a single centrepost providing two seperate entrances.
• Comes complete with padlock.
• Posts may be surface mounted or sunken.
• Can be supplied with additional latch post to lock in the open position.
• Powder Coated to Customer Specification or Galvanised finishes available.
• Option with vehicle height restrictor bar. Comes complete with 'WARNING HEIGHT RESTRICTION' signage and padlock.