Available in both automatic & manual.
The TTM Sliding Gate, a pioneering concept, using a simple yet reliable design, and introducing an external friction drive
mechanism, to produce durable and efficient results.
BS/EN 12453 COMPLIANT
Complies with safety features announced under the EU standards and regulations. Five profiled Safety Edges are provided; each consisting of 2 parallel electrically conducted rubber strips. These are connected to the main control panel by two cables, which are concealed within the lower beam, which transmit messages to and from the safety edges. In the unlikely event of a fault, messages will be transmitted to the necessary safety edges instructing the gate to be stopped, regardless of its current operation.
Sliding Gates Design Features
Aesthetics the TTM Cantilevered Automatic Sliding Gates are made to order and can be supplied with a height of up to 2.4 metres with a drive through of up to 10 metres wide; all with a ground clearance of 125mm.
The main gate frame comprises of upper and lower 75mm square aluminium-tube rails with the main uprights made from
the same material. The 30mm diameter infill's, all having an 6mm wall thickness and set at 125mm centres, are mounted on our custom-made lower beam extrusion.
The TTM sliding gate is unique in that the External Friction Drive is incorporated into the lower beam as opposed to the inside face of the gate, protecting it from the elements, whilst also being completely out of view.
The gate has a sophisticated, durable and secure appearance. Spikes can be fitted to line the top of the gate to warn off intruders, and the 6mm thick evenly-spaced individual aluminium bars further add to the sturdy appearance.
The compact housing of the electronics, coupled with the drive motor and supports being expertly hidden.
Sliding Gate Installation/building requirements
The heavy-duty automatic sliding gate will be assembled and fully tested within the production factory, thus minimising the disruption on site. The gate will be delivered, ready to be lowered on to the pre-installed concrete plinths.
Access Control Options
Proximity Card Readers and Controllers, Keypads, Remote Control Transmitters, Push-Button control (Open/Stop/Close),
Overriding Key Switches, Intercom Systems, Token Acceptors, Screen mounted or Chassis Mounted Transponders, Revenue Systems Counting Systems and L.E.D. Traffic Lights.
Sliding Gate Infill Options
Tubular, Pallisade, Weld Mesh, Roll Top, Solid or Wooden Slats or Panels. Other options of infills are available gates can be totally custom made to suit.
|
